• Downstream

    Department

1-  Full Study Of Optimization And Performance Improvement Methods For Dehydration Units Of Gachsaran Oil And Gas Production Company

2-  Detailed Design and Procurement Engineering of TEG Dehydration Package for South Azadegan oilfield Development Project-PEDEC/AzarAB

3-  Basic Engineering, HAZOP & HAZID Study for LPG Storage for POGC

4-  Optimization and Basic Design of Flaring System of Jam Petrochemical Plant

5-  Feasibility Study And Basic Design For Transfer Of Atmospheric PSVs Gas Outlet To Flare Header And Investigating Operational Function Of All PSVs, Flare Networks And Related Accessories Of Refineries No.1 & 2

6-  Front End Engineering Design of optimizing Flare Systems in 22 Process units in Karoon Oil and Gas Production Company

7-  Front End Engineering Design (FEED) of replacing low pressure compressors of 6 compressor stations in NISOC Maroon, Ahwaz and Aghajari oil production units

8-  Feasibility Study for possibility of Flare gas recovery during start up and shut down in South Pars Refineries

9-  Investigating the causes of Deforming of Gas pipe in the water Seal Pot of the Main Flare (Hasheminejad Gas Refinery Company)

10-  Feasibility Study for Completing Jetty No.12 of Pars Petrochemical Port in order to export petrochemical Liquids

11-  Feasibility Study for Optimizing the Flare of Pars Petrochemical Port in order to achieve smokeless combustion

12-  Front-End Engineering Design (FEED) for Gathering Pipeline and Production Unit of the 3rd phase of Darquain oilfield development

13-   Front-End Engineering Design (FEED) for Gathering Pipeline and Production Unit of the 3rd phase of Darquain oilfield development

14-  Bio-Ethanol from Lignocelluloses Material pilot Plant Basic Design

15-  SARAJEH Manifold and 16" Pipeline Detailed Design

16-  Study of methods of H2S separation from oil compared to methods with stripper column

17-  Study of technical and economic aspects regarding the replacement of flare-stack pilots for the reduction of fuel gas consumption in NISOC oil and gas production facilities

18-  Investigation of different technologies for decreasing or eliminating gas flaring in oil and gas production facilities

19-  Technical and economical assessment of optimized application of Masjid-I-Sulaiman gas well condensates

20-  Technical and economical assessment of ammonium sulphate unit of Razi petrochemical company

21-  Economical evaluation and investment estimation for extraction and pretreatment of crude oil and development of software

22-  Development of   software for updated cost estimation of surface facilities

23-  Development of software for feasibility study of Iranian oil refinery plants

24-  Development of software for two and three phase separator selection and design

25-  Second phase development of two and three phase separator design software

26-  Development of especial thermodynamic properties prediction software appropriate to existing compounds in natural gas transmission, distribution and refining industries

27-  Development of reactive and non-reactive phase equilibrium prediction software appropriate to existing compounds in natural gas transmission, distribution and refining industries

28-  Development of new software for detailed design of Natural gas dehydration plant (GasPro®)

29-  Development of software to simulate industrial dryers (DrySim®)

30-  Development of comprehensive new software to predict basic and computational thermodynamic properties of compounds in gas industries

31-  accuracy Investigation of HYSYS and PROII softwares for determination of glycol solubility and applying necessary modifications to increase mentioned accuracy in National Iranian South Oil Company

32-  Feasibility study of development of software to simulate chemical processes with emphasis on aromatic oxidation plants.

33-  Development of software for heat exchanger design

34-  First phase of improvement, development and modification of industrial dryer technology

35-  Analysis and comparison of the methods used to predict light hydrocarbon’s thermodynamic properties used in gas - liquid processing plant.

36-  Development of  software for air cooler design

37-  Development of new software for industrial dryer design

38-  Development of new software for industrial dryer selection and design

39-  Development of new software for predicting pressure drop in pipe lines

40-  Development of software for two and three phase separator selection and design

41-  Development of new software for air cooler selection, simulation and detailed design

42-  Investigating reasons for low standards of domestic process equipment and suggesting ways to overcome these problems

43-  Development of standard software for economic evaluation of constructing new chemical plants

44-  Development of software for shell and tube heat exchanger design

45-  Development of software for spray dryer design in ceramic industrial

46-  Simulation of ammonium production units

47-  Development of software for process equipment selection and design

48-  Development of software for modeling Polymer Composites production process

49-  Investigating optimization of energy consumption for sugar production industries

50-  Mathematical modeling and simulation of absorption and desorption columns in natural gas sweetening process

51-  Simulations of air cooler heat exchangers

52-  Improvement of mathematical model for performance prediction of fractured reservoirs

53-  Development of a new model for optimizing layout of distillation columns for non sharp separations

54-  Development of mathematical model of bubble columns

55-  Computer aided detail design of shell and tube heat exchanger

56-  Computer aided detailed design of plate heat exchangers

57-  Simulation and optimization of reactors for acetylene to ethylene hydrogenation

58-  Steady state and dynamic computer simulation of distillation tower

59-  Investigating numerical methods for solution of equations developed from steady state and dynamic simulation of distillation towers

60-  Operation improvement in STPP process

61-  Design of a STPP production plant and construction of a laboratory scale unit

62-  Olefin unit simulation in the HYSYS environment

63-  Kangan refinery simulation in the HYSYS environment

64-  Offering shortcut methods for investment cost estimation in industrial processes

65-  Heat exchanger networks design using contact limitation

66-  Simulation and modeling of cylindrical dryer

67-  Simulation of gas condensate separation unit for Bandar-e-Imam petrochemical company

68-  Investigating numerical solution methods for fiber movement prediction model

69-  Simulation of Khark Methanol production unit

70-  Simulation of Bandar-e-Imam petrochemical company EDC production unit

71-  Simulation of fluidized bed dryers

72-  Simulation of batch Rotary dryer

73-  Selection of optimized NGL production process and simulating a NGL plant

74-  Mathematical modeling and simulation of extractive distillation tower

75-  Optimizing natural gas dehydration process using simulation

76-  Attaining optimized sequencing of distillation towers

77-  Dynamic simulation tray tower with emphasizing on hydraulic equation and chemical engineering specs

78-  Mathematical modeling of Freezing Drying process

79-  Simulation of spray dryers via CFD techniques

80-  Combined simulation of shell and tube heat exchangers

81-  Development of an algorithm for optimization of tray towers

82-  Simulation of Two-phase fluid transfer in pipeline taking into  account  to Climate changes

83-  Simulation of Fluidized Bed dryers via CFD techniques

84-  Fluid movement in rotary cylinders using CFD techniques

85-  Determining Initial guess for tray column simulation via Genetic Algorithm

86-  Mathematical model for drying process in conveyors

87-  Laboratory investigation and simulation of Two-phase fluid flow through different fittings

88-  Attaining optimized sequencing of distillation towers based on heat exchange possibility between heat exchangers

89-  Modeling, simulation and optimization of thermally coupled connection tower

90-  Development of a new method for determining approximate tray efficiency in distillation columns via Genetic algorithm techniques

Contact info

Head Office:
No. 9, Maragheh Alley, Nejatollahi St., Tehran, Iran.
Email: info@capegroup.ir    
Phone: +98-21-88851219
Fax: Internal 120 & 420

More Information